CHOOSING THE RIGHT LIGHT BULBS FOR YOUR CHANDELIER

You have just purchased that fabulous chandelier that you have been mulling over for ages. The cost was high but you convinced yourself that it is a sound investment and you went for a high quality chandelier on the basis that it would be in the family for generations to come. The chandelier is grandiose and ornamented with a multitude of crystal trimmings that reflect light with all colours of the rainbow in a beautiful fashion around the hallway. You have the perfect position for the chandelier and you have carefully chosen your design scheme to complement the traditional elegance of the chandelier. The only issue is that it has 24 light bulbs which if you calculate the power consumption at 40 watts a light bulb is a massive 960 watts which is nearly a kilowatt. That is the power consumption of an electric heater which cannot be good for your electricity bills or indeed for the environment. So what do you do.?
Lets look at some of the choices.

Halogen Bulbs

Halogen Bulbs are definitely the perfect solution from an aesthetic perspective . . The simple clear lines and elegant flame tip of the candle bulb complement the chandelier and the clear bright light will ensure that you maximise the sparkle from the crystal. So now you have the perfect light bulb from visual point of view and the halogen bulb will save 30% in energy when compared to traditional incandescent bulbs. But that is still a lot of power so the answer here is to fit a dimmer switch and use dimmable halogen bulbs and this way you can not only adjust the light level to the perfect setting, but also you will save energy. Just a word of warning, make sure that the wattage rating of your dimmer switch is sufficient for all your halogen bulbs.

CFL

If your focus is to save more energy saving both in electircity costs and contributing further to environmental sustainability then you will need to move to CFL technology and go for a energy saving candle bulb with a flame tip. The looks are not as good as the halogen bulb but the CFL will save you a much greater 80% in energy costs against the traditional filament light bulb.

LED Bulbs

If you are looking for the ultimate in energy conservation then you need to go for a LED bulb and if you select the LED Candle Bulbswith a flame tip. Again the bulb is not quite so elegant as the halogen as is is slightly broader and these ones have a multitude of separate LED lights which give a high technology appearance but the environmental benefits are most impressive. These bulbs only consume 3 watts in power each and will produce the light output of a traditional 25 watt light bulb so for our 24 light chandelier example that is 72 watts consumption against 600 watts which is simply amazing.

HOW MUCH CO2 DOES A LIGHT BULB CREATE?

You might well be confused by all this talk about Carbon Dioxide (CO2) and light bulbs. Why do the government and environmental authorities say that the move to energy saving light bulbs is so important and why has legislation been put in place to progressively ban the incandescent light bulb. Some people say, a light bulbs is a sealed glass unit so how can it produce any CO2 anyway?

Well it is not the light bulb itself but it is the CO2 created in the generation of the electricity that the light bulb consumes. Now clearly the amount of C02 created will depend on the type and the efficiency of the power station which is worst for coal power stations but if your electricity is generated by wind power then your light bulb will not be responsible for creating any CO2 at all during its operation. But right now the majority of electricity is generated by coal powered stations so lets look at the figures for those.

Average CO2 emissions (in Grams) for generating 1KWh electricity (by source):

Source	Grams of CO2 produced
Coal	870
Oil	650
Natural gas	487
Nuclear energy	16
Hydropower	20
Wind energy	11

Source – Gridwatch.co.uk

Lighting Technology (800 Lumens)	Daily Kwh Consumed (@8hr)	Annual Kwh Consumed (@8hr/day)	Co2 Produced (Coal Based Power Generation)
Incandescent (60 Watts)	0.48	175.2	152.42 Kg
Halogen (42 Watts)	0.34	124.1	107.96 Kg
CFL (14 Watts)	0.11	40.15	34.93 Kg
LED (9 Watts)	0.07	25.55	22.23 Kg

Power Station Pollutants

The 3 main pollutants produced by a powers station are:-

1. Sulphur Dioxide, which is responsible for acid rain, is produced at 20 tons per year for a 1 Mega Watt mini electricity generating station
2. Nitrogen Oxide, which is responsible for smog, is produced at 20 tons for a 1 Mega Watt mini electricity generating station
3. Carbon Dioxide CO2, which is thought to be responsible for global warning, is produced at 7500 tons for 1 Mega Watt mini electricity generating station

Now when you consider that a typical commercial electricity generating station would be 500 Mega Watt capacity then it is clear to see that the burning of coal produces massive amounts of pollutants.

Then looking at CO2 in more detail, if you had a 100 watt light bulb and left it on all year then the generating station would create 750kg of CO2 during that year. Now it is unlikely that you would have a light bulb on continuously by lets say you have the light bulb on for 4 hours each day then that is still responsible for the creation of 125kg of CO2. So that means that if you change your light bulb for an energy saving CFL which will only consume 80% of the energy then you will help save the environment by reducing CO2 emissions by 100kg every year.

Then to put this in perspective in 2007 around 19% of all electricity generated was used for lighting purposes which is a very significant proportion. This means that a reduction in energy consumption in lighting has a major impact on overall CO2 emissions.

The other key fact to put this into perspective is that electricity generation account for around 70% of the CO2 emissions for cars and three times the total emissions from aviation as quoted by the International Energy Association (IEA). Clearly with these statistics then the migration from the incandescent light bulb to the energy saving light bulb will be a major contributor in reducing CO2 and global warming.

LED Drivers : All You Need To Know

An LED driver refers to an electrical device that regulates the power supply to a string or LED. It responds to the changing needs of the LED device by providing a consistent amount of power as its electrical properties vary with temperature.

With outputs that are compatible with the electrical features of the LED, a LED driver may offer dimming through pulse width modulation circuits and may include several channels for separate control of various LEDs/LED arrays. Without the right drivers, LED fixtures may become extremely hot and unstable, thus causing poor performance or even permanent failure.

LED Drivers: The Different Types

There are many different types of LED drivers categorized by the output voltage, output current, maximum switching frequency, form of packaging, and supply voltage.

Each channel’s output can range between 250 µA and 50 A, with common chips carrying an output current of 20, 25, and 100 mA per channel. The commonly available voltage sizes are 2.3 to 5.5 V and 3 to 5.5 V. However, you can readily find LED drivers bearing a supply voltage of up to 630 V.

1. Constant Voltage

Constant voltage LED drivers can be obtained in numerous manufacturing standards and are designed to meet high specifications for quality and efficiency.

2. Dimmable LED Drivers

24v Mains Dimmable LED Driver

By dimming your LED lights, you get the freedom to enjoy different scenes. You can create a romantic atmosphere in the dining room, or establish a spectacular viewing experience for your guests during office presentations. You need a dependable LED driver that meets all electrical requirements if you want to dim your LED lighting system.

Dimmable LED Drivers: Understanding LED Driver Dimmer Controls

LED drivers with dimming capability offer the flexibility of dimming the lights from 0-100% while maintaining color and temperature. Remember, dimming an LED light can also reduce the operating temperature of your fixture, ultimately boosting LED efficacy as well as lamp life.

In the olden days, LEDs and dimmers weren’t always so expedient. But as technology advanced, powerful dimming controls entered the market to add more definition to their performance. To effectively control your LED light intensities, you’ll need to fix a dimmer that’s compatible with the LED driver you intend to use.

3.0-10V Dimming Drivers

LED technology is virtually taking the market by storm. Complimenting a 0-10V dimmer with an already power-efficient LED lighting is not only efficient but also effective. A LED lighting high-quality dimmer (powered by ERP LED driver) can help users save big on costs associated with energy consumption. Moreover, they assume a superior control capability when compared to other lighting applications.

LED Drivers: Their Applications

LED drivers can be used as:

• Industrial, outdoor, residential, and commercial lighting
• Automotive interior, tail lights, and portable flashlight
• Signage and LED backlighting
• Garden and elevator lighting

LED drivers: How to Select the Right LED Driver

When you’re searching for reliable LED drivers, you should take into consideration several attributes, including Output Voltage, Supply Voltage (-0.3 to 20 V, 2.7 to 5.5 V, and 3 to 5.5), as well as Maximum Switching Frequency ( between 200 Hz and 200GHz). You’ll be able to get the right chip that’s suitable for use as a high-power LED driver, dimmable LED driver, constant current LED driver, RGB driver or 24v LED driver on an integrated circuit or any other circuits that might require such driver chips.

 

Article Source – Copyright © 2018 Saving Light Bulbs – https://www.saving-light-bulbs.co.uk/blog/led-drivers-all-you-need-to-know/

Buyers Guide on LED Bulbs

LEDs bulbs, an abbreviation of light-emitting diodes bulbs, are kinds of light sources that exhibit a high level of efficiency.  They are different from other conventional types of bulbs like incandescent & halogen lamps. Their lifespan is superior and they consume less energy and emit little amount heat.

LED bulbs: How long do they last?

A high-quality LED bulb can last for at least 20,000 hours, and serve you for around 50,000 hours. For comparison purposes, incandescent bulbs and CFLs have a lifespan of 1,000 hours 9,000 hours respectively. With consistent daily use—8 hours a day—a good quality LED bulb could serve you for about 17 years!

LED bulbs: The Advantages over CFLs

• Durable: LED bulbs are more durable, lasting about 5- 10 years.
• Efficiency: LED bulbs are highly energy efficient. They consume half of the electricity that conventional bulbs use.
• Environment: LED bulbs are Eco-Friendly. They don’t use mercury like the CFLs.
• Heat dissipation: The heat dissipation of LED bulbs is lower than the conventional ones. Their bulb filament is fairly cool and there is no heat around the bulb.

Top 9 Factors to Consider

Lighting is an important aspect of any home. So, doing it right will uplift your home. However, before purchasing LED bulbs, you should consider vital factors, including:

1. Fitting

Fitting is an important aspect of LED bulbs. Thus, you should always select the bulb that has the right fitting. For instance, if you’re replacing an old bulb, take it to the store. However, if it’s impossible to take it with you, have the fitting reference number and share it with the store technicians.

2. Cost

Don’t be scared by the upfront (initial) cost of LED bulbs. In the long run, LEDs could save you big.

3. Note Color Rendering Index

The CRI is used to indicate the accuracy of colors under the LED bulb’s light. The CRI, which ranges from 0-100, is high during the day (i.e.  100). Recommended CRI for interior lighting is 80. To compare LED bulbs, observe the CRI of different bulbs with similar Kelvin temperature.

4. Brightness

When purchasing LED bulbs, ensure you understand your brightness needs. Therefore, purchase one that quenches your brightness thirst.

5. LED Lamp Voltage

LED bulbs come in different voltage ratings. The voltage ratings vary from 6V- 240V. For searchlights, low voltage LED bulbs are preferred. However, 120-240 V LED bulbs are ideal for normal room lighting.

6. Shape & Direction of Light

The shape of your LED light bulb determines the style of the room plus its holder. So, depending on your style, you can either choose Omnidirectional, Flood reflector, or even Flame tip LED bulbs.

Finding the right LED bulb shape is part of your room’s aesthetics. So, get the right brand with the right characteristics. For instance, a golf LED bulb will spread its light in 360-degrees, making it ideal in golf courts.

7. Quality matters

Ensure that the quality of the LED bulb you buy is superior. You’ll not want to buy something and after a few days, it’s spoilt.

8. Think lumens, not watts

Don’t purchase your bulb by the number of watts. With the new technologies focusing on energy-efficiency, LED bulbs can now emit the same light amount for less power.

The Bottom-line: Lighting Your Home

Most living rooms require general, ambient LED lighting complemented by unique task-explicit accent lighting.

Thus, getting ambient lighting for your room will radiate an entirely comfortable amount of brightness. Always ensure that all your rooms are supplied with a central ambient LED lighting source.

Additionally, install a task LED lighting system that is easily switched on & off –depending on your preferences & needs. For instance, bulbs for reading & sewing should have an elaborate control system. Moreover, don’t forget to include an explicit on and off switch or bulbs that give extra light over your kitchen benches as well as bathroom mirrors.

Accent lighting, when done right, are powerful at emphasizing paintings, gardens or house plants, and even collectibles.

Article Source (Copyright © 2018 Saving Light Bulbs) —  https://www.saving-light-bulbs.co.uk/blog/buyers-guide-on-led-bulbs/

A Guide to Lux Levels

Light Level, also referred to as Illuminance, represents the amount of light that is measured on a surface (which is plane). Or, it can be described as the total luminous flux incident that strikes on a plane surface. It is measured per unit area and is commonly known as LUX.

Understanding LUX

LUX, also called DIALux is increasingly becoming popular in the modern world. You can now plan in DIALux with great luminaires from the world’s most renowned manufacturers and enjoy ultimate freedom in the lighting design process.

Benefits of LUX

Featuring professional light planning, LUX is extremely simple and effective. It utilizes the latest luminaire data and state-of-the-art software that’s always available for free. The colored light scenes with light emitting diodes (LED) are energy efficient and guarantee excellent illumination for all your buildings including outdoor spaces.

Recommended LUX Levels

The level of lighting in the outdoor is approximated to be 10,000 lux, albeit on a normal, clear day. However, for a building, especially in the areas that are closer to windows, the LUX levels may possibly be reduced to 1,000 lux. On the other hand, the middle area may register a 25 – 50 lux. Consequently, you may need additional lighting equipment to compensate for these low levels. For precision & detailed works, the level of light may range between 1500 to 2000 lux.

In homes– The recommended illumination levels for homes is often 150 lux. The living and dining rooms may work pretty well with about 25 to 50 lux.

Supermarkets– Working spaces like supermarkets and mechanical rooms require light levels of about 750 lux.

In offices– The normal workstation requires 500 LUX while the ADP area and conference rooms require 500 LUX and 300LUX respectively. The auditorium requires 150-200 LUX while the training room and internal corridors should be supplied with 500 LUX and 200 LUX respectively.

The table below represents the light levels for different workspaces.

Activity	Illumination (Lux, lumen/m2)
Public areas featuring dark surroundings recommended	20-50
Warehouses, theaters, homes, archives	150
Simple orientation meant for short visits	50-100
Working areas involving occasional visual tasks	100-150
Easy classes	250
Showrooms, normal office work, a study library, PC works	500
Detailed drawing and mechanical work, operation theaters	1,000
Supermarkets, office landscapes	750
Performance of prolonged & exacting visual tasks	5000-10000
Performance of extremely special visual activities of very low contrast & small size	10000-20000

 Factors Affecting the Effectiveness of Illumination

The effectiveness of illumination is usually affected by several factors, including light quantity & quality, contrast, amount of flicker, shadows, and intensity of glare. To optimize illumination in security, emergency, and safety situations, consider adjusting each factor differently. Lighting standards also play an important role in the design, installation, durability, and efficient distribution of illumination.

Measuring and stimulating Light Level – Illuminance

Illuminance is measured in foot candles (ftcd, fc, fcd) or lux (in the metric SI system). A foot candle is actually one lumen of light density per square foot; one lux is one lumen per square meter.

•        1 lux = 1 lumen / sq. meter = 0.0001 phot = 0.0929 foot candle (ftcd, fcd)

•        1 phot = 1 lumen / sq. centimeter = 10000 lumens / sq. meter = 10000 lux

•        1 foot candle (ftcd, fcd) = 1 lumen / sq. ft. = 10.752 lux

Calculating Illumination

Illumination is calculated using the formula = Ll Cu LLF / Al (1). In this formula, I denotes illumination (measured in lux, i.e. lumen per m2), Ll represents lumens/ lamp (i.e. lumen), Cu is the coefficient of utilization, while LLF is light loss factor and Al is the area/ lamp (measured in m2).

Light Planning: The Steps

Light planning is a five-step process. The actual process involves:

• Planning objective analysis
• Planning conditions analyses
• Overall planning
• Detailed planning
• Documentation

Understanding Glare

Glare can be categorized into two groups: discomfort and disability glare. The level of discomfort glare can be measured by determining the glare index in accordance to the UGR method. This is often graded on a scale, which ranges between 13 and 28 where the greater the glare index the greater the degree of glare. The smallest variation in the glare index designating a significant difference is three.

Reflections from reflective glare or materials can usually be avoided by adopting the following strategies:

·         Choosing convenient luminaire positioning

·         Using materials for all reflective surfaces

·         Selecting fixture with effective screening and low luminous intensity

·         Picking out luminaires with a bigger surface area

·         Choosing light colors for your ceilings and walls

Balance is key

A well-balanced luminance is essential to boost visual clarity, effectiveness of the ocular functions of the eye, and contrast sensitivity. You should always avoid high luminance which can cause glare, intense luminance contrasts that may cause visual tiredness, and low luminance contrasts, which trigger a staid atmosphere that doesn’t stimulate.

LED Lighting – A Platform For Business Growth

Global businesses are accelerating at a faster pace because of growth and innovation. They are embracing the most advanced trends and technologies to stay ahead and prove their excellence. In pursuit of the same, they are using advanced lighting systems not only to improve their overall efficiencies, but also to enhance ambiance of a workplace. Most businesses have started using LED lights because they are energy efficient and wonderful option for businesses. LED lights are cost-effective and can transform any environment.

LED bulbs can run for thousands of hours

According to a report, LED bulbs can run for thousands of hours without requiring any sort of maintenance or repair. This quality of LED bulbs make them ideal for businesses of any size. In fact, they can be easily replaced or updated as and when required.

Moreover, they do not get too hot to touch, which makes them a safer option for people. Employees also feel relaxed as well as motivated to accomplish their task without suffering stressing their eyes.

Some workplaces need soft lighting

Some workplaces need soft lighting that’s why, they use a wide range of LED bulbs. LED bulbs provide the required lighting and complete control as well. They come in a wide range of shapes and sizes to fulfill the requirements of industrial units and businesses. No doubt, it can impact the performance of employees.

Wattage

When it comes to wattage, you will have many options. You can choose according to your office requirements. If can hire a lighting designer to suggest the best LED lighting for your space in order to reduce energy bills and improve the work area. In fact, it is possible to increase or decrease the amount of lighting, which is an added advantage.

Creativity

In order to blend creativity and stimulate innovation, business owners choose a wide range of LED lights. LED lights create a perfect environment and dissolve creative and decorative appeal in the atmosphere. In fact, it helps employees to think innovatively while enjoying the work under any condition.

So, whether you want to add extraordinary spark to your business or accelerate the pace of change or make the environment light, refreshing and energetic, you can always use LED lights for your business.

Impact of Well-Planned And Implemented LED lighting

Home lighting is an important aspect for any interior design project. Well-planned and implemented lighting can spice up a normal area and add extraordinary elegance to it. “The best way to improve the beauty of a home is to improve its lighting,” says a renowned architect and lighting specialist.

Decorating a home with the right light

Today, most people invest a huge amount of money in cabinetry, counter tops, furniture along with lighting in order to make their home a great place to rest and rejoice. In fact, decorating a home with the right light is like creating a work of art.

Choose LED lamps that look quite impressive

However, if you do not have expertise, you can talk to a lighting expert. Lighting experts will help you to choose the best light to illuminate your rooms in a cost-effective and efficient way. If you are trying to achieve well-lit surrounding, choose LED lamps that look quite impressive. Whether you have a small room or a large hall, you can pick LED lamps.

Ambient lighting to achieve desired brightness

Lighting experts also suggest ambient lighting to achieve relaxed glow. It not only provides complete illumination, but also the desired brightness. You can go for chandeliers, ceiling or wall-mounted fixtures for exceptional appeal.

Ceiling lights

LED Ceiling lights are efficiently light up your entire room. In fact, it is a great way to add your personality as well as style. You can choose anything from spotlights to pendants in order to create a relaxing environment. LED Ceiling lights are not only ideal for any room, but also impress your guests. People choose decorative lights for that extraordinary appeal and sophistication. For better yields, you can go for warm light for awesome illumination.

LED lighting offers multiple benefits

Additionally, LED lighting offers multiple benefits, including longer life, recyclable, low energy consumption, no harmful effects, and good safety. That’s why, they are prominently used for various applications – industrial, commercial, etc.

So, whether you want to transform an ordinary room or revamp any space, you can also always go for high-quality and reliable LED lighting. It is an advanced, safe and effective way of illumination.

Choose LED Bulbs for Ultimate Style & Appearance

Whether you want to revamp your room or enhance its overall décor, you should always choose high quality LED bulbs. Modern LED bulbs not only help you to create personalised style, but also make your home an elegant, calm and peaceful place to rejoice. Some people still believe that traditional lighting is unmatched; however, in reality, LED lights are effective, reliable, clean, smart, efficient and productive than any other traditional lighting system. In other words, LED lights are the modern lighting solution for illumination. It has many amazing benefits and can produce unique lighting.

Modern LED lighting solutions provide ambient, direct as well as indirect lighting for office and retail applications. In fact, these are ideal for walls, paintings, staircases, and passage illumination. Manufacturers offer a wide range of economical fixtures designed for a variety of applications.

Architects and designers recommend…

People can choose LEDs according to their requirements and preferences. Architects and designers recommend using the light that produce low-reflection and perfect amount and colour of light. Indeed, it is a better way to save energy, increase productivity, reduce glare on the TV and beautify surroundings.

Whether you are a retail outlet owner or an industry owner, you can always choose flexible and efficient LED lights that deliver high lumens, beam intensity and energy efficiency. In this way, they can improve their sales, retain customers and build their brand. Industrial units also use a wide range of track lighting in order to improve safety standards and illuminate the environment.

Offices also use LED lights…

Offices also use LED lights to make their place inviting, relaxing, productive, comfortable and safe. Better lighting conditions improve creativity and motivate employees to work more and achieve more. In this way, businesses can lower their errors, improve productivity and satisfaction. According to some survey results, offices with a high design and equipment quality can achieve productivity increases of up to 35%.

In fact, it is a great way to reduce industrial accidents such as falls and slips. In addition to that, industrial units can go for low bay lighting, warehouse lighting, entrance-way lighting and special lights for poles and brackets as per their lighting requirements. No doubt, LEDs can provide perfect brightness and have a long operational life.

Today, not only industrial units, but also residents go for an outdoor lighting design plan to improve the overall aesthetics of their exteriors. Interior designers and lighting engineers also choose a wide range of reliable LED optical systems that are designed to provide uniform lighting, vertical light distribution, and better visibility.

So, are you ready to use advanced LED bulbs for higher comfort, convenience and greener future?

THE DEVELOPMENT OF THE G9 LED

The History and Uses of the G9 Halogen

The G9 lamp is used extensively in lighting these days. The real advantage of the G9 is the small size which can be a real benefit in decorative lighting. In the olden days the light source of chandeliers was wax candles and these were a real feature of the chandelier. This has now created a strong demand for decorative candle light bulbs but even these can be too obtrusive for modern lighting. If the beauty of a decorative light is in its design and artistic nature,  then the illumination then needs to be as discrete as possible and it was through this need that the G9 was created. With traditional filament light bulbs then it was not possible to create miniature lamps but with the advancement of halogen technology technology then tiny lamps were possible as shown here.
This is a G9 33w Halogen with a clear cover which is a very popular lamp. It produces a significant light output typically 350 lumens which for the miniature size has an excellent lumens to size ratio.

Whilst the halogen is functionally good is does have two major drawbacks. Firstly the nature of halogen lamp technology means that the lifetime is limited to a maximum of 2000 hours. Secondly they are inefficient as 90% or the electricity is converted to heat as opposed to light which is clearly what is needed from a light bulb.

The LED G9

The LED G9 has a number of major benefits over the Halogen G9. The main advantage is that it only uses 10% of the electricity of its predecessor. However the main issue with this technology is that they are significantly larger and this can often be problematic as often they will not fit into the lighting fixture.  As stated previously then the main reason for a lighting manufacturer to select these miniature capsules  is their compact size and this can be negated if the lamp is too large. The early LED G9s were all of quite large proportions as pictured here.

Typically this lamp would be 35mm in diameter which would mean that it is prohibitively large for a number of lighting applications. With the advancement of the LED technology then the size of the  lamps has reduced significantly and now it is possible to get a 5w LED G9 which is of much smaller proportions. The one shown here is 60mm in length but just 18mm diameter.

Whilst this is not as small as the halogen G9 it is now of an acceptable size for a number of decorative lighting fixtures.  It is also possible to obtain LED filament versions and whilst these are quite small again then they are not inherently as reliable as the SMD LEDs. The other more recent development is to introduce dimmable technology. This was not important with the early LED G9 as they were not very bright and accordingly there was not a great necessity to dim the lamps. However with the brighter versions then the dimming capability can be very beneficial to create effective ambience in a room.

Use LED Light Bulbs for Unparalleled Efficacy

Today, more and more consumers across the world have started using LED bulbs because they do not want to compromise with colour quality, brightness as well as performance. In fact, they have started replacing old CFL or incandescent bulbs with LED bulbs because of their efficiency. Because of the advances in LED technology, it becomes possible to save time as well as money while protecting the environment. Most of the lighting specialists also recommend using LED light bulbs because of their unparalleled efficacy.

LED bulbs have the following advantages including:

• LED bulbs save 75% to 80% on energy costs (https://energy.gov/energysaver/led-lighting).
• LED bulbs provide good return on investment for businesses.
• LED bulbs provide light instantly.
• End-to-end uniform lighting.
• Shock resistant.
• These bulbs perform in a seamless fashion.
• These light bulbs work well in the most difficult environment.
• LED light bulbs are known for long lasting operation…

If you want excellent colour, unequal brightness, no flickering as well as long lasting operation, LED is the best option to consider. Even cost-sensitive consumers love to use LED products in their homes and offices because LED light bulbs are not only affordable, but also easy to install and maintain too. LED light bulbs are able to operate efficiently in various applications and angles. Depending on your lighting fixtures, these bulbs can perform.

LED will more likely to penetrate the market…

According to some lighting specialists, as consumer awareness grows, LED will more likely to penetrate the market and become the main source of light. Even today, the adoption of rate of LED is more than any other light, which will continue in the near future.

Today, LED replacement bulbs are also gaining the traction in the market. They not only helps to replace traditional light bulbs, but also improves the overall appearance of the environment.

So, choose the most suitable LED light bulbs to create perfect light quality in a fashionable way.